Fire Testing Equipment's

Approx. Rs 1.05 Lakh / UnitGet Latest Price

Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permits to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. The left-hand side of the chamber has a hole, an exhaust fan fitted to the left-hand side hole. The right-hand side has a hole which permits to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which has a clear glass window on the door. There are shutters on the left-hand side and the right-hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is an aluminum silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20?a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mounted on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply any gas with the instrument.

Specifications:

• Bulb: 100 W, 220V AC
• LUX meter: More than 100 LUX
• Pressure gauge: 2 Kg/cm² (2 bars)

Approx. Rs 1.29 Lakh / PieceGet Latest Price

Some gaseous products of combustion may react with or be absorbed on the walls of the chamber. So the inner wall has the lining of polypropylene and with polycarbonate transparency window is provided.

The chamber is to be fitted with a vacuum pump forced air extraction system, which can be closed at the exit from the chamber when required. The chamber is fitted with sampling positions such that the air tightness of the chamber is   not impaired.

The chamber is containing a mixing axial fan inside the chamber at horizontally and centrally inside the chamber at roof level to ensure rapid mixing of combustion products capable of being switched on and off externally.

A Bunsen burner is to be capable of achieving a flame approximately 100 mm in height. The burner is fitted at the center of the chamber. There is a provision is to be made for igniting and extinguishing the burner from out side the chamber. There is a provision to measure the temperature of the flame at its maximum side. The indication of the temperature is digital.

The specimen support is an annulus cut from a sheet steel nominal thickness 2 mm of approximately 100 mm overall diameter with a 75 mm diameter hole carrying temperature resistance wires approximately 10 mm apart to form a lattice. The complete assembly is equipped with a non-combustible side support arm to give a tennis racket appearance. This sample holder assembly has the provision of sliding of sample without the leakage of the chamber.

Additional Information:

Approx. Rs 1.29 Lakh / PieceGet Latest Price

             The Toxicity Chamber is to consist of an airtight enclosure of about 1m³ volume lined with opaque plastic sheeting having a hinged, fitted with a transparent plastic panel.

              Some gaseous products of combustion may react with or be absorbed on the walls of the chamber. So the inner wall has the lining of polypropylene and with polycarbonate transparency window is provided. The chamber is fitted with a vacuum pump forced air extraction system, which can be closed at the exit from the chamber when required. The chamber is fitted with sampling positions such that the air tightness of the chamber is   not impaired. The chamber is containing a mixing axial fan inside the chamber at horizontally and centrally inside the chamber at roof level to ensure rapid mixing of combustion products capable of being switched on and off externally.

Additional Information:

Approx. Rs 85,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 22 Lakh / PieceGet Latest Price

• With Paramagnetic type oxygen analyzer
• With infrared CO2 & CO analyzer
• With 5 kW cone shapes radiant electrical heater
• Weighing device 2000 gm X 0.1 gm
• Blower 1 hp
• Differential pressure sensor with orifice plate and indicator
• 10 kV spark igniter
• Software for data collection and analysis system

Additional Information:

Approx. Rs 22 Lakh / PieceGet Latest Price

• With Paramagnetic type oxygen analyzer
• With infrared CO2 & CO analyzer
• With 5 kW cone shapes radiant electrical heater
• Weighing device 2000 gm X 0.1 gm
• Blower 1 hp
• Differential pressure sensor with orifice plate and indicator
• 10 kV spark igniter
• Software for data collection and analysis system

Additional Information: